Band Heaters

CERAMIC BAND HEATERS
NOZZLE BAND HEATERS
 
                                                                                                                                 

  Mica Band Heaters

     Elmec Mica Band heaters are made of Nickel Chrome resistance ribbon precisely wound on specially selected Mica or  Micanite sheet. It is  then      insulated  and  covered  by metal sheathing and rolled to the required shape. We build every technically possible heaters as per your      requirement.
   
MICA Band Heaters

    Features
      Rust resistant Sheath.
      Top Quality Nickel Chrome ribbon.
      Max. 3.6 watts/cm2
      Max. Operating temperature up to 250 °C
      Available with inbuilt insulation pad to reduce power consumption.
           Click here for - Type of terminals
 
    Applications
      Plastic Processing Machinery.
      Injection and Blow Moulding.
      Extruders.
      Many other Applications. (Medical,Lab-Equipments....etc)
 
   Ceramic Band Heaters
     Elmec Ceramic Band heaters are made of helically wound Nickel Chrome resistance coil precisely stretched and strung through steatite ceramic cores      forming a flexible heating mat. It is then placed in flexible stainless steel housing with ceramic fiber insulation. These heaters are very flexible and can be      fitted easily. We built every technically possible heaters as per your requirement.
 
Ceramic Band Heaters
 
 
    Features
      Nickel Chrome Resistance Wire.
      Ceramic Fiber Insulation reduces power consumption by 20 to 30%
      Available with heating & cooling combination.
      Max.7 watts per sq. cm.
      Max.Temp.250oC
      Terminal Box, European plug option.
      The electrical connection is available with cable outlets or post terminals covered with junction box.
      The heater can be manufactured from a diameter of 38 mm upward.
      For special type of terminals,drawing is required.
           Click here for - Type of terminals
 
    Applications
      Plastic Processing Machinery.
      Injection and Blow Moulding.
      Extruders & Many other applications.
          
 
   Nozzle Band Heaters
     Elmec Nozzle Band heaters are available as 

            Mica Nozzle Band Heaters
            Plastic proof Nozzle Band Heaters
            Leaf Proof Nozzle Band Heaters
     We build every technically possible heaters as per your requirement.
 
Nozzle Band Heaters
A
              B
C
 
 A.  Mica Nozzle Band Heaters
 
      Sheath material brass.
      Max.operating temp 280°C.
      Max.surface load 25w/sq. inch.
      Fiberglass or Teflon insulated SS mixed wire terminals.
 
 B.  Plastic proof Nozzle Band Heaters
 
      Plastic proof.
      Sheathing material high grade steel or brass.
      Operating temp brass 280°C - SS 350°C.
      Max. surface load Brass 30w/sq. inch, SS sheath 45w/sq. inch.
      Metal braided Fiberglas wire terminals.
 
C.  Leaf proof Nozzle Band Heaters
 
      Plastic proof.
      Sheathing material high grade steel.
      Max.operating temp 600 °C.
      Max.surface load 60 w/Sq. inch.
      Insulation - high grade mineral insulation.
      Metal braided fiberglass wire terminals.
 
    Applications
 
      Hot runner bushings.
      Nozzles of plastic processing machineries.
 
 
    Types of Terminals
 
     1. 12" Lead or Post Terminals.
     2. Junction Box
     3. Two flexible fiberglass insulated lead wires without junction box.
     4. Protected fiberglass Wires with G.I or SS flexible conduct..
     5. Vertical/horizontal male plug on the heater Max. Amp 16 at 250V.
     6. Fiberglass wire exists between Inner and Outer sheath.
     7. Post terminal option available at 19 mm length.
     8. Ceramic connectors Max. Amp - 25 A.
 


1 & 7



2


2


3
       


4


5


6


8
       
     When ordering please specify :
 
      Inside dia. & width of the heater.
      Wattage & Voltage.
      Construction type
      Type of terminals required.
      Drawing where special type of holes or cutout required.