FAIL (the browser should render some flash content, not this).
strip-heaters
MICA/CERAMIC FRAME HEATERS STRIP HEATERS MINERAL INSULATED FLAT HEATERS

  • MICA/CERAMIC FRAME HEATERS
Elmec flat heaters & Heating Frames are  available in any dimensions. They can be delivered in Mica or Ceramic insulation, depending on the  temperature requirement. We built every technically possible heaters as per your requirement.

FEATURES MICA/CERAMIC FLAT & FRAME HEATERS


Supplied in Mica as well as Ceramic insulation

Mica insulated type

max. charge 25 watts/sq.inch

max. operating temp 250° C.

Ceramic insulated type

max. charge 40 watts/sq.inch

 

max. operating temp 360° C.

Can be supplied to customer specifications and drawings

Applications
  1. Plastic Processing machinery.
  2. Injection and Blow Moulding.
  3. Moulds and Dies.
  4. Extruders.

TOP

  • STRIP HEATERS
Elmec Strip Heaters are made of helically wound resistance coil evenly stretched and strung through series of ceramic insulators. Resistance coil is mechanically connected to screw terminals or lead wires for positive connection. The element assembly is electrically insulated and covered by metal sheathing.
Features
  1. Kanthal resistance wire (Nickel Chrome resistance wire optional)
  2. Screw or wire lead termination
  3. Available with fins
  4. Maximum sheath Temperature: 400oC
  5. Nominal watt density: 3.2 watts/cm2
  6. Available in sizes: (W x T) 32mm x 8mm, 38mm x 10mm, 45mm x 12mm.
  7. Length Maximum 2000mm
Applications


  1. Ovens
  2. Hot plates
  3. Moulds
  4. Dies
  5. Drying
  6. Melting
  7. Baking
  8. Incubators
  9. Food Warmers
  10. Air Heating
  11. Sealing Bars
  12. Load Banks
  • MINERAL INSULATED FLAT HEATERS

Elmec mineral filled heaters are designed and developed to replace Mica Strip heaters. These heaters provide trouble free long lasting service even at high temperatures and watt density. Helically wound coil is placed inside a tube filled with MgO and pressed to get a flat surface.

Features

  1. Available in SS304,SS316 and Iconel sheath.
  2. Max watt density 10w/sq cm
  3. Max operating temperature 450 °C
  4. Screw or Wire terminals.

Applications

  1. Plastic processing machinery
  2. Tank heating.
  3. Zinc and Lead melting pots.
  4. Bag cutting and sealing machine.
  • When ordering please specify

Width of the heater

Heater Thickness

Wattage and Voltage

Type of termination

Length of the heater

 

Drawing required for special type construction

TOP